Work

Assume we’re in Grand Junction and gravitational acceleration is 9.797 m/s².

Lifting a Book

How much work is done in the act of lifting a 0.7 kg book off the floor and placing it onto a bookshelf that is 1.9 m tall?

Solution

Since \(\bigl(\text{Force}\bigr) = \bigl(\text{Mass}\bigr) \times \bigl(\text{Acceleration}\bigr),\) the force required to lift the book is \(F = (0.7) \times (9.797)\,.\) Since \(\bigl(\text{Work}\bigr) = \bigl(\text{Force}\bigr) \times \bigl(\text{Displacement}\bigr),\) the work required to lift the book 1.9 m is \(W = \bigl(0.7 \times 9.797\bigr) \times (1.9)\) which is equal to \(13.03\) Joules.

Lifting a Magic Book

Suppose the mass of a magic book is \({3.9y+0.7}\) kg per \(y\) meters it is lifted off the floor. How much work is done in the act of lifting this magic book off the floor and placing it onto a bookshelf that is 1.9 m tall?

Solution

Since the book gains mass as it’s lifted, the force required to lift it increases as it’s lifted: \(F = \bigl(3.9y+0.7\bigr)\times(9.797).\) Since the force is variable, dependent on \(y,\) the work done lifting the book 1.9 m must be computed as an integral \(\int F\,\mathrm{d}y\,:\) \[ \begin{align*} \int\limits_0^{1.9} \bigl(3.9y+0.7\bigr)\times(9.797) \,\mathrm{d}y \;&=\;(9.797) \Bigl(\tfrac{3.9}{2}y^2 + 0.7y\Bigr) \biggr\rvert_{y=0}^{y=1.9} \\[1em]&=\;(9.797) \Bigl(\tfrac{3.9}{2}(1.9)^2 + 0.7(1.9)\Bigr) \\[1em]&\approx\; 81.996 \text{ Joules.} \end{align*} \]

Springs and Hooke’s Law

A large spring has a natural length of one meter, and 7 Newtons of force is required to keep the spring compressed to \(\tfrac{5}{6}\) its natural length. How much work would be required to stretch the spring to \(\tfrac{6}{5}\) its natural length?

Solution

Let \(F\) denote the force required to maintain the spring’s current extension/compression, and let \(k\) represent the spring’s constant per Hooke’s Law. Since 7 N of force is required to compress the spring by \(\tfrac{1}{6}\) of a meter, \[ F = kx \quad\implies\quad 7 = k\tfrac{1}{6} \quad\implies\quad k = 42\,. \] Then extending the spring by \(\tfrac{1}{5}\) of a meter will require this much work: \[ W = \int\limits_{0}^{1/5} F \,\mathrm{d}x = \int\limits_{0}^{1/5} 42x \,\mathrm{d}x = 42\tfrac{1}{2}x^2\biggr\rvert_{0}^{1/5} = \tfrac{21}{25}\,\text{ Joule.} \]

Pulling up a Rope

A 100-meter length of rope is hanging over the edge of a cliff. The rope has a mass of 0.23 kg/m. How much work is done pulling the rope up over the edge of the cliff?

Solution (work as integral of force)

While pulling up the rope, let \(y\) denote the length of rope pulled up so far, so there is a length of \((100-y)\) remaining rope still hanging. The mass of the rope remaining is \(0.23(100-y),\) and so the force required to pull up that remaining rope against the force of gravity is \(9.797(0.23)(100-y).\) The total amount of work done pulling up the rope then is the accumulation of this force, calculated as an integral: \[ \begin{align*} \int\limits_0^{100} 9.797(0.23)(100-y) \,\mathrm{d}y \;&=\; 9.797(0.23)\Bigl(100y-\tfrac{1}{2}y^2\Bigr) \biggr\rvert_{y=0}^{y=100} \\[1em]&=\;(2.25331)\Bigl(100(100)-\tfrac{1}{2}(100)^2\Bigr) \\[1em]&=\;(2.25331)\Bigl(\tfrac{1}{2}100^2\Bigr) \\[1em]&\approx\; 11266.55 \text{ Joules.} \end{align*} \]

Solution (integral as sum of work at each height)

Imagine the 100 meters of rope as a sequence of infinitely many, infinitesimally small segments with tiny thickness \(\Delta y.\) Each segment of rope has mass \((0.23\,\Delta y)\) and so the force required to pull up each individual segment is \(9.797(0.23\,\Delta y).\) The segment that is \(y\) below the cliff’s edge will then require \(9.797(0.23\,\Delta y)(y)\) Joules of work to haul up over the cliff. Adding up all this work over all infinitesimally small segments, \[ \begin{align*} \int\limits_0^{100} 9.797(0.23\,\mathrm{d}y)(y) \;&=\; 9.797(0.23)\Bigl(\tfrac{1}{2}y^2\Bigr) \biggr\rvert_{y=0}^{y=100} \\[1em]&=\;(2.25331)\Bigl(\tfrac{1}{2}(100)^2\Bigr) \\[1em]&\approx\; 11266.55 \text{ Joules.} \end{align*} \]

Pumping Water

The density of water is 1 g/cm³, or 1000 kg/m³

A cistern shaped like an inverted cone is embedded in the earth, its circular opening flush with the level ground around it. The cistern is 8 m deep, its opening has a 5 m radius, and the surface of the water is 1 m below the cistern’s opening. Suppose we place a floating pump on the water’s surface attached to a hose leading out of and away from the cistern. How much total work would the pump do pumping all the water from the cistern?

Solution (work as integral of force)

Because the cistern is not full, we will have to calculate the work in two portions and add them: the work required to move the entire mass of water to the cistern’s opening, and the work required to pump the (diminishing) mass of water from the opening.

First, the initial cone of water has volume \(\tfrac{1}{3}\pi R^2 (7)\) where \(R\) is the radius of the cone’s base and can be calculated by considering similarity of the conical cistern with the cone of water: \[ \frac{R}{7} = \frac{5}{8} \quad\implies\quad R = \tfrac{35}{8}\,. \] Since the cone of water has volume \(\tfrac{8575}{192} \pi\) cubic meters it’ll have mass \(1000 (\tfrac{8575}{192} \pi)\) kilograms. To move that entire mass of water to the opening of the cistern will require a force of \(9.797\bigl(1000 (\tfrac{8575}{192} \pi)\bigr)\) Newtons to overcome gravity, and since that water must be pumped \(1\) meter to the opening it’ll require \(9.797\bigl(1000 (\tfrac{8575}{192} \pi)\bigr)(1)\) Joules of work, which is \(9797 \Bigl(\tfrac{8575}{192} \pi\Bigr)\) Joules.

Now that the mass of water is at the cistern’s opening we can calculate the work required to pump it out. As the water is pumped out, let \(y\) be the height of the remaining cone of water. The remaining cone of water has volume \(\tfrac{1}{3}\pi R^2 y\) where \(R\) is the radius of the remaining cone of water and can be expressed in terms of \(y\) by considering similarity of the conical cistern with the cone of water: \[ \frac{R}{y} = \frac{5}{8} \quad\implies\quad R = \tfrac{5}{8}y\,. \] Since the remaining cone of water has volume \(\tfrac{25}{192} \pi y^3\) cubic meters it’ll have mass \(1000 (\tfrac{25}{192} \pi y^3)\) kilograms, and pumping it will require a force of \(9.797\bigl(1000 (\tfrac{25}{192} \pi y^3)\bigr)\) Newtons to overcome gravity. The total amount of work done pumping out this water then is the accumulation of this force, calculated as an integral: \[ \begin{align*} \int\limits_0^7 9.797\bigl(1000 (\tfrac{25}{192} \pi y^3)\bigr) \,\mathrm{d}y \;&=\; 9797\Bigl(\tfrac{25}{192} \pi \Bigr) \int\limits_0^7 y^3 \,\mathrm{d}y \\[1em]&=\; 9797\Bigl(\tfrac{25}{192} \pi \Bigr) \tfrac{1}{4}(7)^4 \\[1em]&=\; 9797\Bigl(\tfrac{25}{192} \pi \Bigr) \tfrac{1}{4}(7)^4 \end{align*} \]

Altogether this is \[ \begin{align*} 9797 \Bigl(\tfrac{8575}{192} \pi\Bigr) &+ 9797\Bigl(\tfrac{60025}{768} \pi \Bigr) \\[1em] \tfrac{9797\times 8575}{192}\pi \Bigl( 1&+\tfrac{7}{4} \Bigr) \;\approx\; 3\,780\,146\text{ Joules.} \end{align*} \]

Solution (integral as sum of work at each height)

Imagine the water in the conical cistern as a stack of infinitely many, infinitesimally thin disc-shaped layers of water with tiny thickness \(\Delta y.\) A single layer of water at a depth of \(y\) in the cistern has a volume of \(\pi R^2\, \Delta y\) cubic meters, where \(R\) is the radius of that disc-shaped layer and can be expressed in terms of \(y\) by considering similarity of the conical cistern with the cone of water: \[ \frac{R}{8-y} = \frac{5}{8} \quad\implies\quad R = \tfrac{5}{8}(8-y)\,. \] Since that layer of water has volume \(\pi R^2\, \Delta y\) cubic meters it’ll have mass \(1000 (\pi R^2\, \Delta y)\) kilograms. To pump that layer from the cistern will require a force of \(9.797\bigl(1000 (\pi R^2\, \Delta y)\bigr)\) Newtons to overcome gravity, and since that layer must be pumped from a depth of \(y\) it’ll require \(9.797\bigl(1000 (\pi R^2\, \Delta y)\bigr)(y)\) Joules of work. Adding up all this work over all the infinitesimally thin layers, \[ \begin{align*} \int\limits_1^8 9.797\bigl(1000 (\pi R^2 \,\mathrm{d}y)\bigr)(y) \;&=\; 9.797(1000)(\pi)\Bigl(\tfrac{5}{8}\Bigr)^2 \int\limits_1^8 y(8-y)^2 \,\mathrm{d}y \\[1em]&=\; 9797\pi\tfrac{25}{64} \Bigl(32y^2-\tfrac{16}{3}y^3+\tfrac{1}{4}y^4\Bigr)\biggr\rvert_{y=1}^{y=8} \\[1em]&\approx\; 3\,780\,146\text{ Joules.} \end{align*} \]